All rotating equipment

Bearings and seals

Consulting on bearings and shaft seals across rotating equipment, not as a parts supply. Repeat failures, fits, lubrication, and seal-system piping are the usual questions. We read the evidence. We do not replace the bearing or the seal.

Consulting

Spike Industrial consults on all rotating equipment. Bearings and seals are one class, not the limit of the work. We do not supply labor and we do not perform the hands-on work.

  • Reliability assessment and troubleshooting support
  • Root-cause failure analysis from the records and from evidence others have already gathered
  • Review of alignment, vibration, and balancing data. We do not take the readings
  • Installation and overhaul planning, and owner’s-representative oversight of the contractor
  • Commissioning verification: a walk-down and a punch list before acceptance
  • Reliability recommendations the plant’s own team, or its contractor, can carry out

Problems we are asked about

These are the questions that usually start the call. They are not a failure catalog, and they are not a claim about how often anything happens.

  • The same bearing location failing after each repair
  • A seal flush or piping plan that does not match the service
  • Fits, crush, or lift called out in an inspection and then ignored
  • Lubrication that the failure report and the OEM manual describe differently

Standards, when the specification requires them

There is no single API standard for every bearing. Seal and oil-system standards apply when the specification names them:

  • API 682 Shaft sealing systems for centrifugal and rotary pumps.
  • API 610 Bearing and seal requirements, when the pump itself is specified to API 610.
  • API 614 Lubrication, shaft-sealing, and oil-control systems, when that system is in the scope.

The plant specification and the OEM manual govern. Naming a publication is not an API certification or monogram, and it is not a claim that every machine of this type was built to that publication.

Ask about this machine, or about another.

If it rotates and it is not on this page, the consultation is still the same. Houston-based, for plants nationwide.